The Knowledge About Car Instrument Dashboard Mould

When designing cars, automotive manufacturers pay a lot of attention to the interior. This interior not only serves as a reflection of the exterior body, but also influences the visual and haptic impression that car passengers have on the entire car. In addition, this interior is a key part in ensuring the security of the automobile. Therefore, the Car Instrument Dashboard Mould plays a vital role in the design of the car.

The molded parts of the instrument panel are made through injection molding. During this process, molten plastic resins are injected into an injection mold and then shaped. Usually, the plastic resins that are used to make the instrument panel are PP and ABS.

There are many types of molded parts of the instrument panel, such as screen type instrument panel, frame type instrument panel, channel type instrument panel and cabinet type instrument panel. All of these types have their own special functions and requirements, so each of them needs to be made by a specific instrument panel injection mould.

The Car Instrument Dashboard Mould is a kind of plastic injection mould that is designed for making the instrument panel in automobiles. It can be applied to a wide range of automobile models, and it is widely used in the field of automotive manufacturing.

This mold is characterized by a movable mould wall 210 that is provided with stoppers, wherein the bottom plate 220 of the movable mould wall 210 moves between the stoppers to prevent the bottom plate 220 from moving and dislocating during the operation of the molded part. This mechanism is advantageous in preventing the unqualified material from overflowing during the injection molding process and reducing the production cost.

Alternatively, the movable mould wall 210 is provided with a core 120. The core 120 is disposed in the upper mold 100, and it does not block the opening and closing movements of the first bottom plate 230 and the second bottom plate 240 during the operation of the molded part. The first bottom plate 230 and the second bottom plates 240 may then be removed from the molded instrument panel with ease, so that the formed dashboard can be easily stored and transported.

The core 120 may be a hollow core. This type of core is designed to improve the flow of the melt into the molded part. In addition, the hollow core reduces the weight of the molded part, which can greatly increase the speed of the injection molding machine. This method also reduces the molding cycle and production cost of the instrument panel.

Changan S203-EV front grille with high-gloss decorative parts Mould